Package README - PENOS2.ZIP

This readme file contains information on how to install the PENOS2 device

drivers via PINSTALL.EXE.

This package contains device drivers that support CalComp, IBM, and Wacom 

pen/tablet devices. 

README.1ST CONTENTS:

1.0 SYSTEM REQUIREMENTS

2.0 INSTALLATION

3.0 PROBLEM DETERMINATION & TECHNICAL SUPPORT 

4.0 PENOS2.ZIP CONTENTS

5.0 TRADEMARKS

1.0 SYSTEM REQUIREMENTS

Before you install the PENOS2.ZIP, make sure that you have installed

OS/2 WARP Version 3.0 or later.

2.0 INSTALLATION

Having unzipped PENOS2.ZIP, you should now perform the 

following steps:

1. Read LICENSE.PKG.

2. If you agree with the LICENSE terms and conditions, using PKUNZIP2, 

   unzip DRIVERS.ZIP.

3. Backup the unzipped files and directories to diskette.

4. From an OS/2 command line, type A:PINSTALL (using the backup diskette).

   This will bring up the Pen for OS/2 installation process.

5. Follow the installation instructions as they are presented. 

6. Upon installation of your selected Pen for OS/2 driver, shutdown

   OS/2 and REBOOT.

The installation will automatically update CONFIG.SYS unless you

specify otherwise.

3.0 PROBLEM DETERMINATION & TECHNICAL SUPPORT 

If you should experience any problems with the PEN for OS/2 device

drivers, contact IBM technical support (1-800-992-4777).

4.0 DRIVERS.ZIP CONTENT

This package contains the following Device driver files and associated

files for installation:

- ARTZ.SYS      The actual device driver for Wacom UD-0608 (ArtZ)

- ARTPAD.SYS    The actual device driver for Wacom KT-0405 (ArtPad)

- PENCC.SYS     The actual device driver for CalComp 3300 series

- IBM730T.SYS   The actual device driver for the IBM730T

- IBM710T.SYS   The actual device driver for the IBM710T

- IBM750P.SYS   The actual device driver for the IBM750P

- IBM360P.SYS   The actual device driver for the IBM360P

- WACOMOS2.SYS  The actual device driver for Wacom SD-501

- EMI.SYS       The actual device driver for Mouse Emulation

- PINSTALL.EXE  Install program 

- README        Additional information pertaining to Pen for OS/2

5.0 TRADEMARKS

The following terms, denoted by an asterisk (*) in this file, are

trademarks or registered trademarks of IBM Corporation in the

United States and/or other countries:

IBM

OS/2

Package README - Laser Disc driver support

This readme file contains information on how to install the Laser Disc driver

support for Pioneer 6000, Pioneer 8000, and Sony 1500 for OS/2 Warp.

README.1ST CONTENTS:

1.0 SYSTEM REQUIREMENTS

2.0 PRELIMINARY STEPS

3.0 INSTALLATION

4.0 PROBLEM DETERMINATION & TECHNICAL SUPPORT

5.0 LASER DISC DRIVER SUPPORT CONTENTS.

6.0 TRADEMARKS

1.0 System Requirements

    Before you install the Laser Disc driver support, make sure that you have:

        a) installed OS/2 WARP Version 3.0 or above with Multimedia support

2.0 PRELIMINARY STEPS

    a) Back up orginal MMPM2.INI file from your system in case problem occurs.

3.0 INSTALLATION

    1) Unzip the VIDDISC.ZIP into any directory.

    2) Type 'MINSTALL' to install the driver.

    3) Follow panel instructions to complete installation.

    4) After installation is completed, shutdown the system and reboot.

4.0 Problem Determination & Technical Support

    No known limitations for this driver.

5.0 Laser Disc driver support Package contents:

This package contains the following files:

    CONTROL.SCR

    LASER.LST

    LVDP6000.DLL

    LVDP8000.DLL

    VDSCPLAY.ICO

    LVDSONY.DLL

6.0  TRADEMARKS

The following terms, denoted by an asterisk (*) in this file, are trademarks or registered

trademarks of IBM Corporation in the United States and/or other countries:

IBM

OS/2

OS/2 Base Device Driver Updates

ThinkPad Infrared Stack (IrDA) Support for OS/2

Last Updated on: 2003-08-07 오후 03:51

--------------------------------------------------------------------------------

Product Information

Bus Type: 

Product Chip / Technologies: 

--------------------------------------------------------------------------------

Driver Information This product is supported by IBM. For Technical Assistance, please refer to the following sources: 

Any README documentation contained within the driver. 

Technical reference material shipped with your device / system, 

The Users Guide to OS/2 Warp, and other reference material contained within the OS/2 Warp product, 

The IBM Software home page for technical support information in your country. 

This software package provides the most current support for Infrared Stack (IrDA) devices for OS/2. 

The following services are supported by the Infrared Stack: 

Printing to an IR-capable printer 

Serial communication through an IR-capable cell phone (see readme) 

LAN (Ethernet and Token Ring) 

High speed transfer rate 

IrDA Stack drivers are designed to work on the following IBM Thinkpad Models: 

380, 380D, 380E, 380ED, 380XD, 380Z, 385D, 385ED, 385XD, 560E, 560X, 560Z, 600, 600E, 600X, 770, 770E, 770ED, 770X, T20, T21. T22, T23, T30, T40 

To install, download to a temporary directory (for example, xxxx) and in an OS/2 window type: 

cd xxxx 

irda 

ddinstal 

and follow the ddinstal instruction. When complete, reboot the system. 

The most current version of this device driver package is part of the IBM Software Choice offerings. 

To learn more about IBM Software Choice visit their home page. 

USB Serial Support

USB Serial Support Package

Last Updated on: 2003-07-30 오전 10:57

--------------------------------------------------------------------------------

Product Information

Bus Type: USB 

Product Chip / Technologies: 

--------------------------------------------------------------------------------

Driver Information This product is supported by IBM. For Technical Assistance, please refer to the following sources: 

Any README documentation contained within the driver. 

Technical reference material shipped with your device / system, 

The Users Guide to OS/2 Warp, and other reference material contained within the OS/2 Warp product, 

The IBM Software home page for technical support information in your country. 

The USB Serial Device Driver includes supports the following types of vendor specific USB Serial Converters: 

FTDI FT8U100AX chip asynchronous serial port 1 (Future Technology Devices International Ltd.) 

Belkin F5U103 USB serial adapter 

MCT USB to RS232 converter (Magic Control Technology Corp.). 

See the readme for a list of tested USB serial converters.

The USB Basic Device Support Package is a prerequisite for this device driver.

The most current version of this device driver package is part of the IBM Software Choice offerings.

To learn more about IBM Software Choice visit their home page. 

IBM Corporation

Installation Utility for WIN-OS/2 Audio Support

Last Updated on: 2001-03-26 오후 06:37

--------------------------------------------------------------------------------

Product Information

Bus Type: 

Product Chip / Technologies: 

--------------------------------------------------------------------------------

Driver Information Primary Driver 

Download this device driver: WININST.EXE 

Driver Support: OS/2 Warp4 

This product is supported by IBM. For Technical Assistance, please refer to the following sources: 

Any README documentation contained within the driver. 

Technical reference material shipped with your device / system, 

The Users Guide to OS/2 Warp, and other reference material contained within the OS/2 Warp product, 

The IBM Software home page for technical support information in your country. 

This utility provides WIN-OS/2 installation support for the audio drivers shipped in OS/2 Warp 4. 

Device Solutions

IBM Corporation

OpenGL PentiumPro Driver

Last Updated on: 2001-03-26 오후 03:25

--------------------------------------------------------------------------------

Product Information

Bus Type: PCI 

Product Chip / Technologies: 

--------------------------------------------------------------------------------

Driver Information Primary Driver 

Download this device driver: OS2OGL.ZIP 

Driver Support: OS/2 Warp 

This product is supported by IBM. For Technical Assistance, please refer to the following sources: 

Any README documentation contained within the driver. 

Technical reference material shipped with your device / system, 

The Users Guide to OS/2 Warp, and other reference material contained within the OS/2 Warp product, 

The IBM Software home page for technical support information in your country. 

OpenGL PentiumPro Driver 

This device driver can be used to enhance OpenGL performance on PentiumPro systems.

Requirements:

Warp 3.0 or later installed 

OpenGL on OS/2 version 9626 or later installed 

PCI based graphics card 

For additional information see OS2OGL.DOC in the OS2OGL.ZIP file.

IBM Corporation

Remote Printer Installation Configurator for RINSTPRN

Last Updated on: 2001-03-29 오후 03:11

--------------------------------------------------------------------------------

Product Information

Bus Type: Parallel Port 

Product Chip / Technologies: 

--------------------------------------------------------------------------------

Driver Information Primary Driver 

Download this device driver: rpinscfg.exe 

Driver Support: OS/2 Warp 

This product is supported by IBM. For Technical Assistance, please refer to the following sources: 

Any README documentation contained within the driver. 

Technical reference material shipped with your device / system, 

The Users Guide to OS/2 Warp, and other reference material contained within the OS/2 Warp product, 

The IBM Software home page for technical support information in your country. 

Remote Printer Installation Configurator for RINSTPRN

Intended for use with releases of the OS/2 Warp product. 

Use with OS/2 Warp see the readme. 

This program helps generate response files for the Remote Multiple Printer Installation Program (RINSTPRN.EXE). These response files are input to RINSTPRN to install print queues, install printer drivers and update other print subsystem components.

Download and execute rpinscfg.exe then see the readme for detail usage. If you require additional assistance, please refer to the Setting Up Printers chapter of your User's Guide to OS/2 Warp.

Package README - GAMEDD.ZIP

This readme file contains information on how to install the GAMEDD.ZIP

joystick device driver package.

This OS/2 driver supports base joystick functions.

README.1ST CONTENTS:

1.0 SYSTEM REQUIREMENTS

2.0 INSTALLATION

3.0 PROBLEM DETERMINATION & TECHNICAL SUPPORT 

4.0 DRIVERS.ZIP CONTENTS

5.0 TRADEMARKS

1.0 SYSTEM REQUIREMENTS

Before you install GAMEDD.ZIP, make sure that you have installed

OS/2 WARP Version 3.00 or later.

2.0 INSTALLATION

Having unzipped GAMEDD.ZIP, you should now perform the

the following steps:

1. Read LICENSE.PKG.

2. If you agree with the LICENSE terms and conditions, using PKUNZIP2,

   unzip DRIVERS.ZIP.

3. Backup the unzipped files to diskette.

4. Follow the installation instructions found in the JOYSTICK.DOC file. 

5. Upon installation of the joystick driver, shutdown OS/2 and REBOOT.  

3.0 PROBLEM DETERMINATION & TECHNICAL SUPPORT

If you should experience any problems with this device driver, contact IBM

technical support (1-800-992-4777).

4.0 DRIVERS.ZIP CONTENTS

This package contains the following files:

- GAMEDD.SYS    The actual device driver

- GAMEVDD.SYS   The virtual device driver

- CONTROL.SCR

- JOYSTICK.SCR

- JOYSTICK.DOC  The actual DD Readme 

- JOYSTK.CH 

- JOYSTK.ICO

5.0  TRADEMARKS

The following terms, denoted by an asterisk (*) in this file, are 

trademarks or registered trademarks of IBM Corporation in 

the United States and/or other countries:

IBM

OS/2

Device Solutions

IBM Corporation

Single Stream MPEG Support

Last Updated on: 2001-04-06 오전 09:40

--------------------------------------------------------------------------------

Product Information

Bus Type: 

Product Chip / Technologies: 

--------------------------------------------------------------------------------

Additional Driver 

Download this device driver: SSMPEG.EXE 

Driver Support: OS/2Warp4 

This product is supported by IBM. For Technical Assistance, please refer to the following sources: 

Any README documentation contained within the driver. 

Technical reference material shipped with your device / system, 

The Users Guide to OS/2 Warp, and other reference material contained within the OS/2 Warp product, 

The IBM Software home page for technical support information in your country. 

This is a Beta Level version for the Single Stream MPEG Support for OS/2 Warp 4, and a Single Stream MPEG type of device (e.g. Visual Circuits MVP adapter, Visual Circuits Reel Time MC adapter , ELSA Movie adapter, others). This Beta Level software and has been made available to you AS IS (e.g. No Technical Support). 

Package README - GAMEDD.ZIP

This readme file contains information on how to install the GAMEDD.ZIP

joystick device driver package.

This OS/2 driver supports base joystick functions.

README.1ST CONTENTS:

1.0 SYSTEM REQUIREMENTS

2.0 INSTALLATION

3.0 PROBLEM DETERMINATION & TECHNICAL SUPPORT 

4.0 DRIVERS.ZIP CONTENTS

5.0 TRADEMARKS

1.0 SYSTEM REQUIREMENTS

Before you install GAMEDD.ZIP, make sure that you have installed

OS/2 WARP Version 3.00 or later.

2.0 INSTALLATION

Having unzipped GAMEDD.ZIP, you should now perform the

the following steps:

1. Read LICENSE.PKG.

2. If you agree with the LICENSE terms and conditions, using PKUNZIP2,

   unzip DRIVERS.ZIP.

3. Backup the unzipped files to diskette.

4. Follow the installation instructions found in the JOYSTICK.DOC file. 

5. Upon installation of the joystick driver, shutdown OS/2 and REBOOT.  

3.0 PROBLEM DETERMINATION & TECHNICAL SUPPORT

If you should experience any problems with this device driver, contact IBM

technical support (1-800-992-4777).

4.0 DRIVERS.ZIP CONTENTS

This package contains the following files:

- GAMEDD.SYS    The actual device driver

- GAMEVDD.SYS   The virtual device driver

- CONTROL.SCR

- JOYSTICK.SCR

- JOYSTICK.DOC  The actual DD Readme 

- JOYSTK.CH 

- JOYSTK.ICO

5.0  TRADEMARKS

The following terms, denoted by an asterisk (*) in this file, are 

trademarks or registered trademarks of IBM Corporation in 

the United States and/or other countries:

IBM

OS/2

IBM Printing Systems Company

IBM Network Printer Resource Utility, English (US)

Last Updated on: 2001-04-06 오전 09:55

--------------------------------------------------------------------------------

Product Information

Bus Type: 

Product Chip / Technologies: 

--------------------------------------------------------------------------------

Driver Information Primary Driver 

Download this device driver: npruen.exe 

Driver Support: OS/2 Warp 

This product is supported by IBM. For Technical Assistance, please refer to the following sources: 

Any README documentation contained within the driver. 

Technical reference material shipped with your device / system, 

The Users Guide to OS/2 Warp, and other reference material contained within the OS/2 Warp product, 

The IBM Software home page for technical support information in your country. 

IBM Network Printer Resource Utility For Warp 3.0 - 4.0

UNZIP the file NPruxx.exe xx = country language 

See the Readme with Install Instructions and License Documents before Installiation 

Overview 

The OS/2 Warp Network Printer Resource Utility (NPRU) is an optional utility that works with the IBM OS/2 PCL and PostScript Network Printer Drivers to manage printer resources such as fonts and overlays. The utility works with printer drivers for the Network Printers 12, 17 and 24

Requirements 

IBM Network Printers 12, 17 and 24.

Contact IBM Printing Systems Company for additional information and help at www.can.ibm.com/ibmprinters

Device Solutions

SoftPro GmbH

FAX and TELEX Driver Application

Last Updated on: 2001-03-26 오후 03:15

--------------------------------------------------------------------------------

Product Information

Bus Type: Parallel Port 

Product Chip / Technologies: 

--------------------------------------------------------------------------------

Driver Information Primary Driver 

Download this device driver: cfxos2.zip 

Driver Support: OS/2 Warp4 

This product is supported by the manufacturer or a third party. 

For Technical Assistance, refer to the following sources: 

Any README documentation contained within the driver. 

The technical reference material shipped with your device / system from the Manufacturer, 

Notes that may be available within this page. 

CFXOS2PD for Warp 3.0 - 4.0

UNZIP the file 

See the Readme, License and Install Instructions 

The CFXOS2PD Printer Driver is an OS/2 Printer Driver that allows any OS/2 application that has a printing interface to generate and send Fax and/or Telex documents using the comFAX (in Europe) and Merkur (in the United States) product family. 

Using this Printer Driver, an application can simply "print" a document which will then be redirected, by the printer driver, into the document management system that forms the full product. 

The product given here is not the full product and is limited to creating a bitmap image of the fax or telex to an output file. 

ACECAD, Inc.

Last Updated on: 2001-04-06 오전 09:57

--------------------------------------------------------------------------------

Product Information

Bus Type: 

Product Chip / Technologies: 

Will also work with Pen for OS/2 device driver

--------------------------------------------------------------------------------

Driver Information Primary Driver 

Download this device driver: ACATIII.EXE 

Driver Support: OS/2; Windows  

This product is supported by the manufacturer or a third party. 

For Technical Assistance, refer to the following sources: 

Any README documentation contained within the driver. 

The technical reference material shipped with your device / system from the Manufacturer, 

Notes that may be available within this page. 

Digitizer Tablets

ACECAD, Inc.

A1812 AdvanceDigitizer

Last Updated on: 2001-03-26 오후 02:51

--------------------------------------------------------------------------------

Product Information

Bus Type: 

Product Chip / Technologies: 

Will also work with Pen for OS/2 device driver

--------------------------------------------------------------------------------

Driver Information Primary Driver 

Download this device driver: ACATIII.EXE 

Driver Support: OS/2; Windows  

This product is supported by the manufacturer or a third party. 

For Technical Assistance, refer to the following sources: 

Any README documentation contained within the driver. 

The technical reference material shipped with your device / system from the Manufacturer, 

Notes that may be available within this page. 

IBM Corporation

IBM SelectaDock Support

Last Updated on: 2001-04-06 오전 11:01

--------------------------------------------------------------------------------

Product Information

Bus Type: 

Product Chip / Technologies: 

--------------------------------------------------------------------------------

Additional Driver 

Download this device driver: WARMDOCK.EXE 

Driver Support: OS/2WarpC, Warp4 

This product is supported by IBM. For Technical Assistance, please refer to the following sources: 

Any README documentation contained within the driver. 

Technical reference material shipped with your device / system, 

The Users Guide to OS/2 Warp, and other reference material contained within the OS/2 Warp product, 

The IBM Software home page for technical support information in your country. 

OS/2 Docking support for the IBM ThinkPad Dock II & SelectaDock

This package supports basic warm-docking and hot-swapping support for:

Dock II Dock Station for IBM Thinkpads: 

755 CE 

755 CSE 

755 CD 

755 CV 

755 CDV 

755 CX 

760 C 

760 CD 

760 E 

760 ED 

760 EL 

760 ELD 

760 L 

760 LD 

SelectaDock for IBM Thinkpads: 

760 E 

760 ED 

760 EL 

760 ELD 

This software package requires OS/2 Warp 3 or higher.

ACECAD, Inc.

A1212 AdvanceDigitizer

Last Updated on: 2001-04-06 오전 09:15

--------------------------------------------------------------------------------

Product Information

Bus Type: 

Product Chip / Technologies: 

Will also work with Pen for OS/2 device driver

--------------------------------------------------------------------------------

Driver Information Primary Driver 

Download this device driver: ACATIII.EXE 

Driver Support: OS/2; Windows  

This product is supported by the manufacturer or a third party. 

For Technical Assistance, refer to the following sources: 

Any README documentation contained within the driver. 

The technical reference material shipped with your device / system from the Manufacturer, 

Notes that may be available within this page. 

Device Solutions

IBM Corporation

IBM Dock II Support

Last Updated on: 2001-04-06 오전 11:23

--------------------------------------------------------------------------------

Product Information

Bus Type: 

Product Chip / Technologies: 

--------------------------------------------------------------------------------

Additional Driver 

Download this device driver: WARMDOCK.EXE 

Driver Support: OS/2WarpC, Warp4 

This product is supported by IBM. For Technical Assistance, please refer to the following sources: 

Any README documentation contained within the driver. 

Technical reference material shipped with your device / system, 

The Users Guide to OS/2 Warp, and other reference material contained within the OS/2 Warp product, 

The IBM Software home page for technical support information in your country. 

OS/2 Docking support for the IBM ThinkPad Dock II & SelectaDock

This package supports basic warm-docking and hot-swapping support for:

Dock II Dock Station for IBM Thinkpads: 

755 CE 

755 CSE 

755 CD 

755 CV 

755 CDV 

755 CX 

760 C 

760 CD 

760 E 

760 ED 

760 EL 

760 ELD 

760 L 

760 LD 

SelectaDock for IBM Thinkpads: 

760 E 

760 ED 

760 EL 

760 ELD 

This software package requires OS/2 Warp 3 or higher.

                without junking the paths (or with PKZIP, using the

-d parm).

Use: Run NICPAK.CMD to determine if a driver is available.  If so, you

can then download the driver package file, unzip it to the same root

where you unzipped nicdrv.zip, and run NICPAK.CMD again to

install/update the NIF and driver files in \IBMCOM\MACS.  You then must

run the MPTS configurator to add to and/or update your protocol.ini

file.  If you allow NICPAK to invoke the MPTS command, it will validate

any changes made to \IBMCOM\PROTOCOL.INI against the values in

\IBMLAN\IBMLAN.INI.

        You can run the NIFCHK.CMD to validate all of the NIFs and drivers

present in \IBMCOM\MACS on your boot drive.  You can optionally check

another drive by running NIFCHK.CMD with the full path to \IBMCOM as a

parameter.

I have also tried to identify chipsets for which I can not find an OS/2

driver.  I know that this doesn't make it work but at least you will be

aware of that.

Several chipsets are used by multiple vendors.  In that case, I have

tried to determine the basic driver for that chipset and point all of

the known descriptions to it.  In some cases I have created additional

NIF files (but not additional drivers) to account for the unique

descriptions.

You may get a selection list with more NICs than you have installed

because various vendors use the same chipset in their products.  Just

pick the one that fits.

NIC driver packages available at http://pws.prserv.net/mckinnis/nicpak/xxx.zip.

Drivers that are provided by IBM to Serenity Systems for inclusion in eComStation

(i.e., in the convenience packages) may not be found in nicpak unless an updated

driver is available.  These are primarily by chipset manufacturer.

3COM

        3Com Fast EtherLink/EtherLink III Bus Master Family OS/2 (3C59X)+*#

        3Com Fast EtherLink/EtherLink XL Family OS/2 (3C90x)+*#

ACCTON

Accton EN1207D Series PCI Fast Ethernet Adapter+

SMC EZ Card 10/100 (SMC1211TX)+

ADMTEK

PCI 10/100 Fast Ethernet Adapter(AN981)+

PCI 10/100 Fast Ethernet Adapter(AN983)+

PCI 10/100 Fast Ethernet Adapter(DEC21140)+

PCI 10/100 Fast Ethernet Adapter(DEC21143)+

Linksys LNE100TX Fast Ethernet Adapter(V4.1+)+*

AMD

AMD PCnet Ethernet Family Adapter+

        Microdyne NE2500/NE5500 Series PCI Ethernet Adapter+

COMPAQ

Compaq NetFlex-3 and Netelligent Network Controllers+

DAVICOM

Davicom DM9 PCI Series Fast Ethernet Adapter+*

DEC

D-Link PCI Fast Ethernet Adapter+

DE-530/DFE-500TX PCI Ethernet Adapter+

DecChip 21140 Fast Ethernet Adapter+

DecChip 21041 "Tulip Plus" Ethernet Adapter+

DecChip 21142/3 10/100 Ethernet Adapter+

Digital Semiconductor 21040 based Ethernet Controller+

Digital Semiconductor 21140 based 10/100 mpbs Ethernet Controller+

Digital Semiconductor 21143/2 based 10/100 mbps Ethernet Controller

Digital Semiconductor 21041 based Ethernet Controller+

Intel 2104x/2114x 10/100 mbps Ethernet Controller+

Kingston EtheRx PCI Fast Ethernet Adapter (DS21140)+

Kingston EtheRx PCI Fast Ethernet Adapter (DS21143)+

SMC EtherPower 10/100 for OS/2+

Thomas-Conrad TC5048 Ethernet PCI Adapter+

Thomas-Conrad TCTX048 100BASE-TX PCI Adapter+

EISA (a variety of older ISA/EISA adapters)

3Com 3C501 EtherLink^

Novell NE1000 Compatible^

Novell NE2000 Compatible (Nat'l Semiconductor)^

Realtek RTL8019 Plug and Play Ethernet Adapter^*

INTEL

        Intel(R) PRO PCI Adapter+#

Intel(R) 8254X Based Network Connection+

Compaq Ethernet or Fast Ethernet NICs+

        IBM 10/100 EtherJet PCI Adapter (OS/2)+#

Intel EtherExpress(TM) PRO/10 PCI LAN Adapter+

        Intel EtherExpress PRO Adapter (OS/2)+#

        Intel 82557/8/9 EtherExpress PRO/100(B) Ethernet Adapter+#

LNEV2

Linksys LNE100TX Fast Ethernet Adapter(V2)+

LITEON

Kingston EtherRx KNE111TX PCI Fast Ethernet Adapter+

Linksys LNE100TX Fast Ethernet Adapter(LINKSYS)+*

Linksys LNE100TX Fast Ethernet Adapter(PNIC)+*

Linksys LNE100TX Fast Ethernet Adapter(DIGITAL)+*

PNIC-100 Fast Ethernet Adapter+

PNIC 100 Base FX Fast Ethernet Adapter+

PNIC II 10/100M Fast Ethernet Adapter+

MACRONIX

        DFE-540TX Fast Ethernet PCI Adapter+

        Edimax EN9120 Family Fast Ethernet Adapters+

        Macronix MX987xx Family Fast Ethernet Adapters+

        Edimax EN9120 Family Fast Ethernet Adapters (APCI)+

        MX987xx Family Fast Ethernet Adapters (APCI)+

NSC (National Semiconductor)

        National Semiconductor DP83815 10/100 MacPhyter3v PCI Adapter+

        Fujitsu Siemens Computers LOM with NSC DP83815+

PCMCIA

3Com Megahertz 10Mbps PC Card OS/2 (w/patch)^

3Com-Megahertz 574B PC Card^@

3Com Megahertz 10/100 LAN CardBus PC Card^@

        D-Link DFE-650 Fast Ethernet PC Card^*

        Edimax EN9120 Family Fast Ethernet Adapters (Cardbus)^

        IBM 10/100 EtherJet CardBus Adapter (08L3147)^

        Intel EtherExpress(TM) PRO/100 Mobile Adapter16^

        Intel EtherExpress(TM) PRO/100 Mobile CardBus 32 Adapter^

Linksys Combo PCMCIA EthernetCard (EC2T)^*

Linksys EtherFast 10/100 PC Card^*

        Macronix MX987xx Family Fast Ethernet Adapters (Cardbus)^

RTL8139(B/C) Cardbus Fast Ethernet NIC^

Silicom Fast Ethernet PCMCIA Adapter^

Xircom Ethernet Adapter 10/100 (CE3B-100BTX)^*

Xircom Cardbus Ethernet Adapter 10/100 (CBE-10/100BTX)^

REALTEK

Accton EN1208 PCI Ethernet Adapter+

        Allied Telesyn AT-2500 Series (Realtek) Adapter+*

D-Link DE-528 PCI Ethernet Adapter+

D-Link DFE-530TX+ 10/100 PCI Adapter+

        D-Link DFE-538TX 10/100 PCI Adapter(C1)+

        D-Link DFE-538TX 10/100 PCI Adapter(D1)+*

RTL8029AS PCI Ethernet Adapter+*

RTL8129 Fast Ethernet Adapter+

RTL8139 Fast Ethernet Adapter+*

SMC EZ Card PCI 10 Adapter(SMC1208x)+*

SIS

        SIS 900/7016 PCI Fast Ethernet Adapter+*

SMC

SMC EtherPower II 10/100 (9432TX) Ethernet Adapter+*

TI

Compaq Ethernet or Fast Ethernet NIC+

VIA

D-Link DFE-530TX PCI Fast Ethernet Adapter(A)+

D-Link DFE-530TX PCI Fast Ethernet Adapter(A3/B)+

PCI 32-bit Ethernet Adapter+

PCI Fast Ethernet 10M/100M Adapter+

Winbond

Winbond W89C840 PCI Ethernet Adapter+

Winbond W89C940 PCI Ethernet Adapter+

+ can be identified by NICDRV (I have a device id)

^ EISA card (not detectable by NICDRV)

* tested with eCS

# driver ships with MCP, ACP

@ No known OS/2 driver is available

Copyrights:

All of the code contained herein is the property of the respective manufacturer

and is, or has been, publicly available subject to the license terms of the

respective manufacturer.

Warranties:

All code is provided "AS IS" without any warranties (conditions) of any kind.

The respective manufacturer disclaims all warranties (conditions) for the

code, either expressed or implied, including, but not limited to, the implied

warranties of merchantability and fitness for a particular purpose and any

warranty of non-infringement. The respective manufacturer is not obligated to

provide support of any kind for the code.

Some jurisdictions do not allow exclusion of implied warranties, so the above

exclusions may not apply to you. 

Limitation of Remedies: 

In no event will the respective manufacturer be liable for any lost profits,

lost savings, incidental or indirect damages or other economic consequential

damages, even if the respective manufacturer or its Authorized Supplier has

been advised of the possibility of such damages.  In addition, the respective

manufacturer will not be liable for any damages claimed by you based on any

third-party claim. 

The above limitations of remedies also applies to any developer and/or supplier

of the code. Such developer and/or supplier is an intended beneficiary of this

section. 

Some jurisdictions do not allow these limitations or exclusions, so they may

not apply to you. 

Chuck McKinnis

mckinnis@attglobal.net